Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Front Wheelhouse Liner Inner Front Extension Replacement (Right SIde, LWE, LUW)

Chevrolet Sonic Repair Manual / Body / Frame and Structure / Front Wheelhouse Liner Inner Front Extension Replacement (Right SIde, LWE, LUW)



Front Wheelhouse Liner Inner Front Extension Replacement

Callout

Component Name

Preliminary Procedure

  1. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  2. Remove the front fascia opening lower cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement.
  3. Remove the front wheelhouse front liner. Refer to Front Wheelhouse Liner Replacement
  4. Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement

1

Front Wheelhouse Liner Inner Front Extension Screw (Qty:?€‰2)

Caution:

Refer to Fastener Caution.

Tighten


3?€‰Y (27?€‰lb?€‰in)

2

Front Wheelhouse Liner Inner Front Extension Push-In Retainer (Qty:?€‰3)

3

Front Wheelhouse Liner Inner Front Extension

Front Wheelhouse Liner Inner Front Extension Replacement (Left SIde)
Front Wheelhouse Liner Inner Front Extension Replacement Callout Component Name Preliminary Procedure Remove the tire and wheel ...

Front Wheelhouse Liner Inner Front Extension Replacement (Right Side, LUV)
Front Wheelhouse Liner Inner Front Extension Replacement Callout Component Name Preliminary Procedure Remove the tire and wheel ass ...

Other materials:

Master Cylinder Replacement
Removal Procedure Warning: Refer to Brake Fluid Irritant Warning. Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution. Place the ignition switch in the OFF position. Remove the battery. Refer to Battery Replacement. Disconnect ...

Intake Manifold Installation (1.8L LUW and LWE)
Clean the sealing surfaces. Install 4 NEW gaskets. Caution: Refer to Fastener Caution. Install the intake manifold (2) and the 7 intake manifold bolts (1) and tighten to  20 Y (15 lb ft). Install the intake m ...

Crankshaft Position System Variation Learn
Note: The crankshaft position sensor system variation learn procedure is required when the following service procedures have been performed, regardless of whether DTC P0315 is set: Engine replacement Engine control module (ECM) replacement Crankshaft damper replacement ...

© 2014-2019 Copyright www.csmans.com
   
0.0125