|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. |
|
|
1 |
Rear Wheelhouse Panel Liner Nut Caution: Refer to Fastener Caution.
2?€‰Y (18?€‰lb?€‰in) |
|
2 |
Rear Wheelhouse Panel Liner Screw (Qty:?€‰5) Tighten
3?€‰Y (27?€‰lb?€‰in) |
|
3 |
Rear Wheelhouse Panel Liner |
Front Wheelhouse Liner Replacement (Rear)
Rear Wheelhouse Liner Replacement (Hatchback - Right)Front Bumper Impact Bar Replacement
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair
Warning.
Disable the SIR system. Refer to SIR Disabling and Enabling.
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove all ...
Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange,
remeasure the tire and wheel assembly on-vehicle runout in order to verify that
the amount of runout has been reduced and brought to within tolerances.
Mark the location of the high spot on the tire and wheel asse ...
Engine Coolant Fan Resistor Mount Repair
Engine Coolant Fan Resistor Mount Repair
Callout
Component Name
Preliminary Procedure
Remove the fasteners securing the radiator surge tank to the engine
shroud and position the surge tank out of the way. Refer to Radiator
...