Chevrolet Sonic Owner's Manual: Recreational Vehicle Towing
Recreational vehicle towing means towing the vehicle behind another vehicle, such as a motor home. The two most common types of recreational vehicle towing are known as dinghy towing and dolly towing. Dinghy towing is towing the vehicle with all four wheels on the ground. Dolly towing is towing the vehicle with two wheels on the ground and two wheels up on a device known as a dolly.
Here are some important things to consider before recreational vehicle towing:
- What is the towing capacity of the towing vehicle? Be sure to read the tow vehicle manufacturer's recommendations.
- What is the distance that will be traveled? Some vehicles have restrictions on how far and how long they can tow.
- Is the proper towing equipment going to be used? See your dealer or trailering professional for additional advice and equipment recommendations.
- Is the vehicle ready to be towed? Just as preparing the vehicle for a long trip, make sure the vehicle is prepared to be towed.
- Dinghy Towing RS Model with Automatic Transmission
- Dinghy Towing All except RS Model with Automatic Transmission
- Dolly Towing from the Front
- Dolly Towing from the Rear
Towing the Vehicle
Caution
Incorrectly towing a disabled vehicle may cause damage. The damage would not
be covered by the vehicle warranty. Do not lash or hook to the chassis components
— including the front and ...
Dinghy Towing RS Model with Automatic Transmission
Caution
If the vehicle is towed with all four wheels on the ground, the drivetrain
components could be damaged. The repairs would not be covered by the vehicle warranty.
Do not tow the vehicle ...
Other materials:
Reduced Engine Power Light
The reduced engine power light should come on briefly as the engine is started.
If it does not come on, have the vehicle serviced by your dealer.
This light, along with the malfunction indicator lamp, displays when a noticeable
reduction in the vehicle's performance occurs.
The vehicle c ...
Intake Manifold Assemble
Install the evaporative emission canister purge solenoid valve (3).
Install the 2 manifold absolute pressure sensors (2).
Install the 2 manifold absolute pressure sensor bolts (1) and tighten.
Install the fuel injection fuel rail assembly ...
Camshaft Cover Installation
Clean the sealing surfaces.
Note: The thickness of the sealing bead should be 2 mm (0.0787 in).
Apply sealing compound to areas (1) and (2). Refer to Adhesives, Fluids,
Lubricants, and Sealers.
Note: The installation procedure sho ...
0.0059