Throttle Body Installation
Throttle/Idle LearnFog Lamp Aiming
Preparation Procedure
Note: Horizontal aim is not adjustable on this vehicle. Vertical
aim is done by an adjusting nut located on the rear of the fog lamp. Prior
to aiming the fog lamps, perform the following steps:
Completely assemble all of the components on the vehi ...
Brake Pressure Modulator Valve Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning.
Caution: Refer to Brake Fluid Effects on Paint and Electrical
Components Caution.
Caution: Always connect or disconnect the wiring harness connector
from the EBCM/EBTCM with the ignition switch ...
Fluid Passages (Gen 2)
Figure 1:
Torque Converter and Differential Housing -
Case Side
Figure 2:
Fluid Pump Body - Fluid Pump Cover Side
Figure 3:
Fluid Pump Cover - Fluid Pump Body Side
Figure 4:
Case - Torque Converter and Differential Housing
Side
Fig ...