|
Callout |
Component Name |
|---|---|
|
Warning: Refer to SIR Inflator Module Handling and Storage Warning. Warning: Refer to SIR Warning.
|
|
|
1 |
Instrument Panel Inflatable Restraint Module Assembly Procedure
|
Automatic Transmission Control Indicator Opening Cover ReplacementTire-to-Wheel Match-Mounting (Vectoring)
Note: After remounting a tire to a wheel or after replacing a tire
and/or a wheel, remeasure the tire and wheel assembly runout in order to verify
that the amount of runout has been reduced and brought to within tolerances.
Ensure that the tire and wheel assembly is properly balanced ...
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
Ensure that the steering wheel is set in a straight ahead position.
Loosen the tie rod jam nut (1).
Adjust the toe to specification by turning the inner tie rod (2). Refer
to Wheel Alignment Specifications.
Caution: Refer to Fastener Caution.
Tighten the t ...
Transmission Fluid Cooler Flushing and Flow Test
GM studies indicate that plugged or restricted transmission oil coolers and pipes
cause insufficient transmission lubrication and elevated operating temperatures
which can lead to premature transmission failure. Many repeat repair cases could
have been prevented by following published procedur ...