Nissan Armada 2025-2026 Owner's Manual: Basic information
WARNING
- The air conditioning system in the Nissan Armada operates only when the engine is running.
- Never leave children, dependent adults, or pets unattended inside the Nissan Armada. Interior temperatures can rise rapidly in hot weather, potentially leading to severe injury or death.
- Avoid prolonged use of air recirculation mode, as it may cause stale air and window fogging.
- Do not adjust climate controls while driving, as this may distract you from safely operating your Nissan Armada.
Always start the engine before activating the climate control system in your Nissan Armada to ensure proper operation and maximum efficiency.
NOTE:
- Odors from both inside and outside the Nissan Armada may accumulate within the air conditioning system and enter the cabin through the vents.
- When parking, it is recommended to disable recirculation mode to allow fresh air circulation, helping to minimize unpleasant odors.
When the engine of the Nissan Armada is stopped by the Idling Stop System, activating the front defroster will automatically restart the engine. While the engine is running, using the defroster prevents automatic engine shutdown.
If the engine is stopped by the Idling Stop System, heating and cooling performance may decrease. To restore full climate control functionality in your Nissan Armada, restart the engine using the Idling Stop OFF switch.
Automatic air conditioner
Basic information
The automatic climate control system in the Nissan Armada is designed to provide
maximum comfort and convenience for both driver and passengers. You can operate
the system eithe ...
Other materials:
System Settings
Auto Volume
This feature automatically adjusts the radio volume to compensate for road and
wind noise.
The level of volume compensation can be selected, or the feature can be turned
off.
1. Press .
2. Select Settings.
3. Select Radio Settings.
4. Select the setting by pressing < or > ...
Key with Integrated Transmitter Programming
Keys can be programming in various ways using the procedures outlined below.
Using the Replacing Keys procedures will first erase all the known keys from the
vehicle. Any existing keys and any new keys will then be programmed. This procedure
should be used any time a key is required to be unle ...
Camshaft Position Actuator Adjuster Removal
Special Tools
EN-6340 Camshaft Adjuster Locking Tool
EN-6628-A Camshaft Locking Tool
For equivalent regional tools, refer to Special Tools.
Note: The right half of the EN-6340 locking tool can be
recognized by the lettering "right", arrow, on the tool.
Pre ...
0.0058