|
Callout |
Component Name |
|---|---|
|
1 |
Camshaft Position Sensor Fastener Caution: Refer to Fastener Caution.
6 Y (54 lb in) |
|
2 |
Camshaft Position Sensor Procedure
Disconnect electrical wiring harness connector from the camshaft position sensor. |
|
3 |
Remove the Camshaft Position Sensor Seal Ring |
Accelerator Pedal Position Sensor Replacement
Crankshaft Position Sensor ReplacementBrake Caliper Inspection
Warning: Refer to Brake Dust Warning.
Inspect the brake caliper housing (1) for cracks, excess wear, and/or damage.
If any of these conditions are present, the brake caliper requires replacement.
Inspect the caliper piston dust boot seal (2) for cracks, tears, ...
Charge Air Cooler Inlet Air Hose Replacement
Removal Procedure
Disconnect the battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
Loosen the charge air cooler inlet air pipe clamp (1) at the ...
Fuel Tank Fuel Pump Module Replacement
Special Tools
EN-48279 Fuel Sender Lock Ring Tool
For equivalent regional tools, refer Special Tools.
Removal Procedure
Relieve the fuel system pressure. Refer to
Fuel Pressure Relief
Remove the fuel tank. Refer to
Fuel Tank Replacement.
Disconnect the elect ...