|
Callout |
Component Name |
|---|---|
|
Preliminary Procedures
Drain the cooling system. Refer to Cooling System Draining and Filling. |
|
|
1 |
Retaining Clamp |
|
2 |
Engine Coolant Temperature Sensor Procedure
Disconnect the electrical connector. |
Crankshaft Position Sensor Replacement
Engine Coolant Temperature Sensor Replacement (Water Outlet)Rear Side Door Window Weatherstrip Replacement (Sedan)
Rear Side Door Window Weatherstrip Replacement
Callout
Component Name
Preliminary Procedures
The rear door side window weatherstrip and window is serviced as
one assembly. Refer to Rear Side Door Stationary Window Replacement. ...
Front Floor Console Extension Replacement - Right Side
Front Floor Console Extension Replacement - Right Side
Callout
Component Name
1
Front Floor Console Extension
Procedure
Use a flat bladed plastic trim tool in order to release the retainers
securing the extens ...
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and
Connection
Removal Procedure
Note: Perform the following procedure when removing the retaining
rings and cooler lines from the quick connect fittings located on the
radiator and/or the transmission.
Pull the plastic cap back from the quick connect fitting
and dow ...