Chevrolet Sonic Repair Manual: Engine Front Cover and Oil Pump Removal

Engine Front Cover and Oil Pump Installation

Special Tools EN-952 Fixing Pin EN-953-A Fixing Tool EN-49977-100 Transmitter Disc Fixation EN-49977-200 Fixing Tool For equivalent regional tools, refer to Special Tools. ...

Engine Front Cover with Oil Pump Replacement

Removal Procedure Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Set the engine to TDC. Refer to Camshaft Timing Chain Inspec ...

Other materials:

Interior Care
To prevent dirt particle abrasions, regularly clean the vehicle's interior. Immediately remove any soils. Note that newspapers or dark garments that can transfer color to home furnishings can also permanently transfer color to the vehicle's interior. Use a soft bristle brush to remove d ...

Instrument Panel Tie Bar Replacement
Removal Procedure Remove the Instrument panel assembly. Refer to Instrument Panel Assembly Replacement. Remove the steering column and wheel from the vehicle. Refer to Steering Column Replacement. Remove the air inlet grill panel. Refer to Air Inlet Grille Panel Replacem ...

Drive Range, First Gear Engine Braking (Gen 1)
When the gear selector lever is moved to the Drive (D) range from the Neutral (N) position, the transmission will provide engine braking. In this operating range, the normally-low 1234 pressure control solenoid 5 is commanded ON and, in the engine braking mode, the following changes occur with ...