Callout |
Component Name |
---|---|
Preliminary Procedure
|
|
1 |
Engine Oil Cooler Outlet Hose Clamps (Qty: 2) |
2 |
Engine Oil Cooler Outlet Hose |
Hood Primary and Secondary Latch Replacement
Hood Primary and Secondary Latch Replacement
Callout
Component Name
1
Hood Primary and Secondary Latch Bolt (Qty:?€‰2)
Caution: Refer to Fastener Caution.
Tighten
22?€‰Y (16?€‰lb?€‰ft) ...
Adhesive Installation of Liftgate Windows
Warning: Refer to Glass and Sheet Metal Handling Warning.
Use a urethane adhesive systems which meet GM Specification GM?€‰3651G.
Remove all mounds or loose pieces of urethane adhesive from the pinchweld
area.
If the original window is being reused, remove all but approxi ...
Brake Pedal Position Sensor Calibration
Calibration Criteria
Note: Do not apply the brake pedal during the brake pedal position
sensor calibration procedure. Any movement of the brake pedal during this
procedure will cause the calibration procedure to fail. If this occurs,
the brake pedal position sensor calibrati ...