|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. |
|
|
1 |
Front Wheelhouse Liner Screw ?€“ Front (Qty:?€‰5) Caution: Refer to Fastener Caution.
2.5?€‰Y?€‰(22?€‰lb?€‰in) |
|
2 |
Front Wheelhouse Liner Push-In Retainer ?€“ Front (Qty:?€‰2) |
|
3 |
Front Wheelhouse Liner ?€“ Front Procedure
Disengage the upper interlocking retainers. |
Front Side Door Weatherstrip Replacement - Door Side
Front Wheelhouse Liner Replacement (Rear)Roof Front Header Panel Replacement
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair
Warning.
Note: The roof front header panel is made of Ultra High Strength
Steel and should be replaced only at factory joints. Repairing or sectioning
of this part is not recomme ...
Secondary Air Injection System Description
The Secondary Air Injection System aids in the reduction of hydrocarbon exhaust
emissions during a cold start. This occurs when the start-up engine coolant temperature
(ECT) is between −10 to +56°C (14?E33°F), the intake air temperature (IAT) is greater
than −10°C (14°F) and it ...
Fuel Tank Filler Pipe Replacement
Removal Procedure
Remove the bracket fastener (1).
Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the fuel tank filler pipe bracket fastener (1).
Disconnect the vent hose (2). Refer to Plastic Collar Quick C ...