Callout |
Component Name |
---|---|
Preliminary Procedures
|
|
1 |
Lower Heater Case Fasteners (Qty: 9) Caution: Refer to Fastener Caution. |
2 |
Heater Tube Cover |
3 |
Lower Heater Core Case |
4 |
Heater Core Procedure
Pull out the heater core. |
Automatic Transmission
P (Park): This position locks the front wheels. It is the best position to use
when you start the engine because the vehicle cannot move easily.
Warning
It is dangerous to get out of the vehicle if the shift lever is not fully
in P (Park) with the parking brake firmly set. The vehicle can ro ...
Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange,
remeasure the tire and wheel assembly on-vehicle runout in order to verify that
the amount of runout has been reduced and brought to within tolerances.
Mark the location of the high spot on the tire and wheel asse ...
Cleanliness and Care
An automobile engine is a combination of many machined, honed, polished, and
lapped surfaces with tolerances that are measured in ten thousandths of an inch.
When any internal engine parts are serviced, care and cleanliness are important.
A liberal coating of engine oil should be applied to fr ...