|
Callout |
Component Name |
|---|---|
|
1 |
Hood Insulator Plastic Retainer (Qty:?€‰6) |
|
2 |
Hood Insulator Procedure
Ensure the 3 integral tabs are secured to the hood. |
Hood Hold-Open Rod Replacement
Hood Primary Latch Release Cable Handle ReplacementBattery Description and Operation
Warning: Batteries produce explosive gases, contain corrosive acid,
and supply levels of electrical current high enough to cause burns. Therefore,
to reduce the risk of personal injury when working near a battery:
Always shield your eyes and avoid leaning over the battery whenever
...
Engine Oil and Oil Filter Replacement
Removal Procedure
Open hood.
Place a drain pan below the vehicle.
Caution: To prevent damage to oil filter cap ensure proper
tool is used. Do not use an open end wrench which may cause damage to
filter cap.
Using a 24mm socket or closed end wrench loosen ...
Control Valve Body Cleaning and Inspection (Gen 2)
Control Valve Body Cleaning and Inspection
Callout
Component Name
Warning: Valve springs can be tightly compressed. Use care
when removing retainers and plugs. Personal injury could result.
Caution: After cle ...