Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Intake Manifold Removal (1.8L LUW and LWE)

Chevrolet Sonic Repair Manual / Powertrain / Engine / Intake and Forced Induction / Intake Manifold / Intake Manifold Removal (1.8L LUW and LWE)


    Remove the 2 intake manifold brace bolts (2, 3).
  1. Remove the 2 intake manifold brace bolts (2, 3).
  2. Remove the intake manifold brace (1).

  3. Remove the 7 intake manifold bolts (1).
  4. Remove the intake manifold (2) and the 4 intake manifold gaskets.
Intake Manifold Removal (1.6L LDE)
Remove the 7 intake manifold bolts (1). Remove the intake manifold (2). Remove the intake manifold gasket. ...

Intake Manifold Replacement
Special Tools EN-34730?E1 Pressure Tester EN-6015 Closure Plugs For equivalent regional tools, refer to Special Tools Removal Procedure Disconnect the battery negative cable. R ...

Other materials:

Wheel Alignment and Tire Balance
The tires and wheels were aligned and balanced at the factory to provide the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing are not necessary on a regular basis. Consider an alignment check if there is unusual tire wear or the vehicle is signi ...

Rear Compartment Lid Hinge Torque Rod Replacement
Rear Compartment Lid Hinge Torque Rod Replacement Callout Component Name Warning: Refer to Hood Hold-Open Device Warning. Preliminary Procedure Open and support the rear compartment lid. Special Tools BO-125 ...

Cylinder Head Removal
Loosen the 12 cylinder head bolts in the sequence as shown. Use the following procedure: Loosen the cylinder head bolts 90 degrees. Loosen the cylinder head bolts 180 degrees. Note: Do not damage the guide sleeves (4) and (5). R ...

В© 2014-2026 Copyright www.csmans.com
 
0.0053