Callout |
Component Name |
---|---|
Preliminary Procedure
Properly raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. |
|
1 |
Intake Manifold Runner Control Valve Actuator Solenoid Valve Fastener (Qty: 3) Caution: Refer to Fastener Caution.
6 Y (53 lb in) |
2 |
Intake Manifold Runner Control Valve Actuator Solenoid Linkage |
3 |
Intake Manifold Runner Control Valve Actuator Solenoid Procedure
Disconnect the wiring harness electrical connector from the intake manifold runner control valve actuator solenoid. |
When to Add Engine Oil
1.8L Shown, 1.4L Similar
If the oil is below the minimum mark on the dipstick, add 1 L (1 qt) of the recommended
oil and then recheck the level. See “Selecting the Right Engine Oil” in this section
for an explanation of what kind of oil to use. For engine oil crankcase capacity,
see Cap ...
Cleaning High Gloss Surfaces and Vehicle Information and Radio Displays
For vehicles with high gloss surfaces or vehicle displays, use a microfiber cloth
to wipe surfaces. Before wiping the surface with the microfiber cloth, use a soft
bristle brush to remove dirt that could scratch the surface. Then use the microfiber
cloth by gently rubbing to clean. Never use w ...
Control Solenoid Valve and Transmission Control Module Assembly Installation
Control Solenoid Valve and Transmission Control Module Assembly Installation
Callout
Component Name
1
Control Solenoid Valve Assembly Filter Plate
Caution: Use care when removing or installing the filter plate
...