If any object is in the path of the window when the express-up feature is active, the window will stop and auto-reverse to a preset position. Weather conditions may cause the window to auto-reverse. The window switch may be held up to the second position to close the window. The window will return to normal operation once the obstruction or condition is removed.
Express Window Operation
Safety Function OverrideLiftgate Hinge Replacement
Liftgate Hinge Replacement
Callout
Component Name
Preliminary Procedures
Remove the liftgate. Refer to Liftgate Replacement.
Lower the rear of the headliner to access the inner bolts. Refer
to Headlining Trim Panel Replac ...
Body Control Module Programming and Setup
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the control module is not properly configured
with the correct calibration software, the control module will not control
all of the vehicle features properly.
Ensure th ...
Inspection/Maintenance (I/M) System DTC Table (LUW)
Inspection/Maintenance (I/M) System DTC Table
System
DTCs Required to Set System Status to YES
If an inspection/maintenance system status indicator did NOT update to
YES during the Inspection/Maintenance System Check,
review ea ...