Chevrolet Sonic Repair Manual: Secondary

Multi-Axis Acceleration Sensor Module Programming and Setup

Note: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the Multi-axis Acceleration Sensor or Inertia Sensor Module (IMU) is not pro ...

SIR Deployed Inflator Modules Are Hot Warning

Warning: After deployment, the metal surfaces of the SIR component may be very hot. To help avoid a fire or personal injury: Allow sufficient time for cooling before touching any metal su ...

Other materials:

How to Add Coolant to the Coolant Surge Tank
Caution This vehicle has a specific coolant fill procedure. Failure to follow this procedure could cause the engine to overheat and be severely damaged. If no problem is found, check to see if coolant is visible in the coolant surge tank. If coolant is visible but the coolant level is not at t ...

Inflatable Restraint Sensing and Diagnostic Module Programming and Setup
Special Tools EL-49642 SPS Programming Support Tool For equivalent regional tools, refer to Special Tools. Note: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the ECU is not properly configured with the correct calibration ...

Engine Oil Cooler Replacement
Removal Procedure Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Drain engine coolant. Refer to Cooling System Draining and Filling Remove the turbocharger oil feed pipe. Refer to Turbocharger Oil Feed Pipe Replacement ...