1. Press
, and then press settings.
2. Press time and date settings.
3. Press < or > to set the date display to DD/MM/YYYY (day/ month/year), MM/DD/YYYY (month/day/year), or YYYY/MM/ DD (year/month/day) display format.
4. Press
.
Setting the 12/24 Hour Format
Setting the Time and DateStabiliTrak® OFF Light
This light comes on briefly while starting the engine. If it does not, have the
vehicle serviced by your dealer.
This light comes on when the StabiliTrak system is turned off. If StabiliTrak
is off, the Traction Control System (TCS) is also off.
If the StabiliTrak and TCS are off, the system ...
Brake Fluid
The brake/clutch master cylinder reservoir is filled with DOT 3 brake fluid as
indicated on the reservoir cap. See Engine Compartment Overview for the location
of the reservoir.
There are only two reasons why the fluid level in the reservoir might go down:
The fluid level goes down b ...
Bushing and Mating Shaft Inspection
Note: Proper bushing and corresponding mating shaft inspection should
be performed before replacing the bushing, shaft, and in some cases, the component
which houses the bushing. Thoroughly clean and dry the bushing and shaft surfaces
before inspecting for damage.
Any of the followin ...