Chevrolet Sonic Owner's Manual: Clock
The infotainment system controls are used to access the time and date settings through the menu system. See Operation for information about how to use the menu system.
- Radio without Touchscreen
- Radio with Touchscreen
- Setting the 12/24 Hour Format
- Setting the Month and Day Format
- Setting the Time and Date
- Automatic Clock Sync
Compass
The vehicle may have a compass display in the Driver Information Center (DIC).
The compass receives its heading and other information from the Global Positioning
System (GPS) antenna, StabiliTrak, ...
Radio without Touchscreen
To set the time and date:
1. Press CLOCK.
2. Select Time and Date Settings.
3. Select Set Time or Set Date.
4. Turn the MENU/TUNE knob to adjust the highlighted value.
5. Press the MENU/TUNE knob ...
Other materials:
Bushing and Mating Shaft Inspection
Note: Proper bushing and corresponding mating shaft inspection should
be performed before replacing the bushing, shaft, and in some cases, the component
which houses the bushing. Thoroughly clean and dry the bushing and shaft surfaces
before inspecting for damage.
Any of the followin ...
Control Valve Body Cover Installation
Control Valve Body Cover Installation
Callout
Component Name
1
Input Speed Sensor Connector
2
Output Speed Sensor Connector
3
Shift Position Switch Connector
...
Trailer BSW function operation
Detection zone
Basic information
The Nissan Armada Trailer Blind Spot Warning (BSW) function is specifically designed
to enhance safety while towing by extending the detection area to include the full
length of the attached trailer. In this configuration, the monitoring zone begins
at th ...
0.0054