1. Press
, and then press settings.
2. Press time and date settings, and then automatic clock sync. 3. Select On to
display the real time or Off to display the time set by the user. 4. Press
.
Setting the Time and Date
Power OutletsClutch and Differential Housing Assemble
Special Tools
R-0007761 Universal Handle for Pullers and Installers
R-0407009 Countershaft Front Bearing Driver
R-0407010 Input Shaft Needle Bearing Puller and Driver
R-0407014 Gearshift Device Bushing Driver ?E#8201;Use with R-0007761
S-9707500 Axle Shaft Seal Installer
Fo ...
Throttle/Idle Learn
Description
The engine control module (ECM) learns the airflow through the throttle body
to ensure the correct idle. The learned airflow values are stored within the
ECM. These values are learned to adjust for production variation and will continuously
learn during the life of the ...
Bushing and Mating Shaft Inspection
Note: Proper bushing and corresponding mating shaft inspection should
be performed before replacing the bushing, shaft, and in some cases, the component
which houses the bushing. Thoroughly clean and dry the bushing and shaft surfaces
before inspecting for damage.
Any of the followin ...