Chevrolet Sonic manuals

Audi Q7 (4M) 2016-2022 Owner's Manual: Setup

Connecting a mobile phone via Bluetooth

Applies to: vehicles with telephone

Requirement: the vehicle must be stationary and the ignition must be switched on. The Bluetooth settings must be open on your mobile device during the connection setup. The mobile device to be connected must not be actively connected to any other Bluetooth device. The MMI must only be connected to one mobile device.

A PIN for a secure Bluetooth connection will be generated.

After connecting successfully

The cell phone contacts are automatically loaded in the MMI. This process can take several minutes, depending on the number of contacts.

Depending on your cell phone and the connection type, you can use the following functions:

Using the hands-free system

Requirement: your cell phone must be connected to the MMI via a Bluetooth Hands Free Profile (Bluetooth HFP).

You can use the hands-free system. You can make calls using the antenna on your mobile device.

Tips

Using two telephones

Applies to: vehicles with telephone, and Audi phone box

You can connect two mobile phones to the MMI at the same time using the Bluetooth HFP, for example a business phone and a private phone. You can be reached in your vehicle through both mobile phones.

Applies to: mobile devices with Bluetooth Message Access Profile (MAP): You can send and receive messages with both mobile devices.

Connecting another mobile device

Requirement: a mobile device must be connected to the MMI. The vehicle must be stationary and the ignition must be switched on. The Bluetooth settings must be open on your mobile device during the connection setup. The mobile device to be connected must not be actively connected to any other Bluetooth device.

A PIN for a secure Bluetooth connection will be generated.

Switching between two mobile devices

Requirement: phone 1 and phone 2 must be connected to the MMI.

Note

Read the information about Audi connect, and be sure to note the connectivity costs section.

Disconnecting a mobile device

Applies to: vehicles with telephone

Introduction
Applies to: vehicles with telephone You can operate various telephone functions easily through the MMI in your vehicle. Depending on the country and the vehicle equipment, the following options may b ...

Using the Audi phone box
General information Applies to: vehicles with Audi phone box Fig. 141 Storage compartment under the center armrest: Audi phone box with connections Depending on vehicle equipment, you may be able t ...

Other materials:

Parking/Turn Signal Lamp
1. Open the hood. See Hood. 2. Remove the parking/turn signal lamp bulb socket from the headlamp assembly by turning counterclockwise. 3. Remove the bulb from the bulb socket by pulling it straight out. 4. Install the new bulb in the bulb socket. 5. Install the bulb socket into the headlamp ...

Backup Lamp Bulb Replacement (Sedan)
Backup Lamp Bulb Replacement Callout Component Name Preliminary Procedure Remove the tail lamp assembly. Refer to Tail Lamp Replacement. 1 Back Up Lamp Bulb Socket Procedure Rotate the back u ...

Liftgate Window Replacement
Special Tools BO-24402-A Glass Sealant Remover (Cold Knife) BO-39032 Stationary Glass Removal Tool Use an adhesive that is approved by GM For equivalent regional tools, refer to Special Tools Removal Procedure Warning: Refer to Cracked Window Warning. Note ...

В© 2014-2022 Copyright www.csmans.com
 
0.0056