|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the turbocharger. Refer to Turbocharger Replacement. |
|
|
1 |
Turbocharger Fastener Caution: Refer to Fastener Caution. Procedure
Replace seals with NEW seals. Tighten
8 Y (71 lb in) |
|
2 |
Turbocharger Coolant Return Pipe |
Turbocharger Coolant Feed Pipe Replacement (LUV)
Water Inlet Replacement (LUV)Finish Care
Application of aftermarket clearcoat sealant/wax materials is not recommended.
If painted surfaces are damaged, see your dealer to have the damage assessed and
repaired. Foreign materials such as calcium chloride and other salts, ice melting
agents, road oil and tar, tree sap, bird droppings, ...
Front Bumper Impact Bar Replacement
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair
Warning.
Disable the SIR system. Refer to SIR Disabling and Enabling.
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove all ...
Exhaust Manifold Heat Shield Installation
Install the exhaust manifold heat shield (2).
Caution: Refer to Fastener Caution.
Install the 3 exhaust manifold heat shield bolts (1) and the washers and
tighten to 8 Y (71 lb in).
...