Chevrolet Sonic Repair Manual: Front

Valve Guide Reaming, and Valve and Seat Grinding

Valve Cleaning Procedure Use soft bristle wire brush to clean any carbon build-up from the valve head. DO NOT use a wire brush on any part of the valve stem. The valve stem is chr ...

Front Seat Back Recliner Handle Replacement

Front Seat Back Recliner Handle Replacement Callout Component Name 1 Front Seat Recliner Handle Cover Cap Procedure ...

Other materials:

Hood
To open the hood: 1. Pull the hood release handle inside the vehicle. It is located on the lower left side of the instrument panel. 2. Go to the front of the vehicle and move the secondary hood release lever toward the right side of the vehicle. 3. Lift the hood and release the hood pro ...

Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located in the rear storage area. 1. Lift the trim cover. 2. Remove the tire sealant canister (1) and the compressor (2). To store the tire sealant canister and compressor: 1. Attach the sealant/air hose to the sealant canister inlet valve. 2. Return the ...

Multi-Axis Acceleration Sensor Module Programming and Setup
Note: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the Multi-axis Acceleration Sensor or Inertia Sensor Module (IMU) is not properly configured with the correct calibration software, the Electronic Brake Control Module will ...