Chevrolet Sonic manuals

Chevrolet Sonic Owner's Manual: Warning Lights, Gauges, and Indicators

Chevrolet Sonic Owner's Manual / Instruments and Controls / Warning Lights, Gauges, and Indicators

Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges could prevent injury.

Warning lights come on when there could be a problem with a vehicle function. Some warning lights come on briefly when the engine is started to indicate they are working. Gauges can indicate when there could be a problem with a vehicle function. Often gauges and warning lights work together to indicate a problem with the vehicle.

When one of the warning lights comes on and stays on while driving, or when one of the gauges shows there may be a problem, check the section that explains what to do. Follow this manual's advice. Waiting to do repairs can be costly and even dangerous.

Power Outlets
The accessory power outlets can be used to plug in electrical equipment, such as a cell phone or MP3 player. The vehicle has an accessory power outlet in front of the cupholders on the center flo ...

Instrument Cluster
United States Manual Transmission Shown, Canada Similar ...

Other materials:

Automatic Transmission Fluid
How to Check Automatic Transmission Fluid It is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to your dealer and have it repaired as soon as possible. There is a special procedure for checkin ...

Front Wheel Drive Shaft Outer Joint and Boot Replacement
Special Tools DT-35910 Drive Axle Boot Clamp Pliers For equivalent regional tools, refer to Special Tools Disassemble Procedure Remove the wheel drive shaft from the vehicle. Refer to Front Wheel Drive Shaft Replacement. Install the drive axle shaft (1) i ...

Neutral - Engine Running (Gen 2)
When the gear selector is moved to the Neutral (N) position, the hydraulic and electrical system operation is identical to Park (P) range. However, if Neutral is selected after the vehicle was operating in Reverse (R), the normally-low 35R pressure control solenoid is commanded OFF and the fol ...

© 2014-2019 Copyright www.csmans.com
   
0.0117