|
Callout |
Component Name |
|---|---|
|
1 |
Instrument Panel Upper Compartment Door Latch Procedures
|
Instrument Panel Compartment Door Latch Replacement
Seat Belt Latch Stop InstallationMulti-Axis Acceleration Sensor Module Programming and Setup
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the Multi-axis Acceleration Sensor or Inertia
Sensor Module (IMU) is not properly configured with the correct calibration
software, the Electronic Brake Control Module will ...
Oil Pump Cleaning and Inspection
Remove the external rotor with the internal rotor.
Visually inspect the components.
Install the external and the internal rotors.
Inspect the axial clearance of the rotors in respect to the control unit
housing upper edge.
Specifications
Permissible measurement is 0.02?E.058 ...
Special Tools (Diagnostic Tools)
Illustration
Tool Number/Description
CH-34730-2C
J-34730-2C
Injector Test Lamp
CH-38641-B
J-38641-B
Diesel Fuel Quality Tester
CH-39021-301
J-39021-301
...