The electronic parking brake in the Nissan Armada will automatically release when the vehicle begins to move, provided the following conditions are met:
In some situations, the parking brake in the Nissan Armada may automatically release within approximately 5 seconds after selecting D (Drive) or R (Reverse), even if the driver’s door is open. However, for safety, always ensure the door is fully closed before moving the vehicle.
WARNING
Additionally, if the vehicle is not completely stopped, the parking brake will not automatically engage even if the ignition is turned off.
CAUTION
In cold weather conditions (below 32°F / 0°C), the electronic parking brake in your Nissan Armada may freeze if applied. This could make it difficult to release.
For safe parking in freezing conditions, it is recommended to place the Nissan Armada in P (Park) and use wheel chocks to prevent unintended movement.
NOTE:
The Nissan Armada electronic parking brake system is designed to provide enhanced safety, convenience, and control, ensuring reliable vehicle stability when parked in various driving environments.
Basic information
Manual operationTraction Control System (TCS)/StabiliTrak® Light
The StabiliTrak or Traction Control System (TCS) indicator/warning light comes
on briefly when the engine is started.
If the light does not come on, have the vehicle serviced by your dealer. If the
system is working normally, the indicator light turns off.
If the light is on and not flashing ...
When to Change Engine Oil
This vehicle has a computer system that indicates when to change the engine oil
and filter. This is based on a combination of factors which include engine revolutions,
engine temperature, and miles driven. Based on driving conditions, the mileage at
which an oil change is indicated can vary co ...
Steel Wheel Repair Description
Caution: Do not heat wheels in an attempt to soften them for straightening
or repair damage from striking curbs, etc. Do not weld wheels. The alloy used
in these wheels is heat-treated and uncontrolled heating from welding affects
the properties of the material.
Caution: The use o ...