|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the engine oil cooler pipe. Refer to Engine Oil Cooler Pipe Replacement. |
|
|
1 |
Engine Oil Cooler Outlet Pipe Bolt (Qty: 2) Caution: Refer to Fastener Caution.
8 Y (71 lb in) |
|
2 |
Seals Note: Replace with NEW seals. |
|
3 |
Engine Oil Cooler Outlet Pipe |
Engine Oil Cooler Outlet Hose Replacement (LUV)
Engine Oil Cooler Pipe Replacement (LUW)Trunk (Sedan)
Warning
Exhaust gases can enter the vehicle if it is driven with the liftgate, hatch/trunk
open, or with any objects that pass through the seal between the body and the hatch/trunk
or liftgate. Engine exhaust contains carbon monoxide (CO) which cannot be seen or
smelled. It can cause unconsci ...
Strut and Shock Absorber Inspection
Note: The strut assembly DOES NOT have to be removed from the vehicle
to perform the following inspection procedure.
Note: A light film of oil on the top portion of the strut is normal.
DO NOT replace the strut for this condition.
Condition 1
Oil or fluid residue only o ...
Body Control Module Replacement
Body Control Module Replacement
Callout
Component Name
Preliminary Procedure
Remove the instrument panel lower trim pad cover. Refer to Instrument
Panel Lower Trim Pad Cover Replacement
1
Body C ...