Callout |
Component Name |
---|---|
Preliminary Procedure
Open and support the hood assembly. |
|
1 |
Accessory Bulb Cover?€‰(Qty:?€‰2) |
2 |
Warning: Refer to Halogen Bulb Warning. Headlamp Bulb?€‰(Low Beam) Procedure
|
3 |
Headlamp Bulb?€‰(High Beam) Procedure
|
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
Ensure that the steering wheel is set in a straight ahead position.
Loosen the tie rod jam nut (1).
Adjust the toe to specification by turning the inner tie rod (2). Refer
to Wheel Alignment Specifications.
Caution: Refer to Fastener Caution.
Tighten the t ...
Tire and Wheel Assembly Balancing - Off Vehicle
Warning: Failure to adhere to the following precautions before tire
balancing can result in personal injury or damage to components:
Clean away any dirt or deposits from the inside of the wheels.
Remove any stones from the tread.
Wear eye protection.
Use coated weights on alum ...
Throttle Body Heater Outlet Pipe Replacement (LUW)
Throttle Body Heater Outlet Pipe Replacement
Callout
Component Name
Preliminary Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling.
1
Engine Coolant Air Bleed Hose
...