|
Callout |
Component Name |
|---|---|
|
1 |
Instrument Panel Center Trim Panel (Qty:?€‰2) Procedure
Use a flat bladed plastic trim tool in order to disengage the retainers securing the center trim plates to the instrument panel accessory upper trim plates. |
Instrument Panel Center Molding Replacement (Without U58)
Instrument Panel Center Upper Molding ReplacementAntilock Brake System Automated Bleed
Warning: Refer to Brake Fluid Irritant Warning.
Caution: Refer to Brake Fluid Effects on Paint and Electrical Components
Caution.
Note: Before performing the Antilock Brake System (ABS) Automated
Bleed Procedure, first perform a pressure bleed of the base brake system. Refer
...
HVAC System Control Module Programming and Setup
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the control module is not properly configured
with the correct calibration software, the control module will not control
all of the vehicle features properly.
Ensure th ...
Main Shaft Disassemble (Gen 2)
Special Tools
69604356 Gear Pullers
For equivalent regional tools, refer to Special Tools.
Remove the 1st gear thrust washer (1) and the 1st gear (2)
using 69604356 pullersand a hydraulic press.
ii
Remove the following components:
1st gear bearing asse ...