Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Spark Plug Replacement



Spark Plug Replacement

Callout

Component Name

Preliminary Procedure

  1. Open the hood.
  2. Remove the engine sight shield.
  3. Remove the ignition coil. Refer to Ignition Coil Replacement.

1

Spark Plugs

Caution:

Refer to Fastener Caution.

Tighten


25 Y (18 lb ft)

Special Tools

EN-194-E Spark Plug Remover

For equivalent regional tools, refer to Special Tools.

Spark Plug Inspection
Spark Plug Usage Ensure that the correct spark plug is installed. An incorrect spark plug causes driveability conditions. Ensure that the spark plug has the correct heat range. ...

Special Tools
Illustration Tool Number/Description CH 9127-E SA 9127-E Fuel Pressure/Flow Adapter ...

Other materials:

Hood Ajar Indicator Description and Operation
Hood Ajar Switch The body control module (BCM) applies B+ to the hood ajar signal circuit and monitors the voltage to determine the position of the hood. When the hood is closed, the switch is open and voltage remains high. When the hood is open, the switch is closed and the voltag ...

Inflatable Restraint Sensing and Diagnostic Module Programming and Setup
Special Tools EL-49642 SPS Programming Support Tool For equivalent regional tools, refer to Special Tools. Note: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the ECU is not properly configured with the correct calibration ...

2-6 Clutch Piston Installation (6T40/45/50)
2-6 Clutch Piston Installation Callout Component Name 1 2?E Clutch Piston Assembly Note: Position the 2?E piston air bleed and large slot toward the top of the case. DT-47796 seal protector ...

В© 2014-2026 Copyright www.csmans.com
 
0.0058