|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling. |
|
|
1 |
Engine Coolant Air Bleed Hose |
|
2 |
Throttle Body Heater Outlet Pipe Procedure
|
Throttle Body Heater Outlet Hose Replacement (LUW)
PowertrainHill and Mountain Roads
Driving on steep hills or through mountains is different than driving on flat
or rolling terrain. Tips for driving in these conditions include:
Keep the vehicle serviced and in good shape.
Check all fluid levels and brakes, tires, cooling system, and transmission.
Shift to a lower gear whe ...
Drivetrain and Front Suspension Frame Replacement
Special Tools
EN-45059 Angle Meter
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Support the radiator and condenser from above using the upper brackets
on each side.
Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle.
Re ...
Camshaft Sprocket Installation
Install the intake camshaft sprocket (3).
Install the intake camshaft position sensor exciter wheel (2) and the intake
camshaft sprocket bolt (1), but do not tighten yet.
Install the exhaust camshaft sprocket.
Note: Tightening of camshaft sprocket bolts will ...