Chevrolet Sonic Repair Manual: Flywheel/Flexplate

Control Valve Body Replacement

Control Valve Body Replacement Callout Component Name Preliminary Procedure Remove the control solenoid valve and transmission ...

Automatic Transmission Flex Plate Installation

Special Tools EN-652 Automatic Transmission Flex Plate Holder For equivalent regional tools, refer to Special Tools. Clean the automatic transmission flex plate bolt threads. Install ...

Other materials:

Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange, remeasure the tire and wheel assembly on-vehicle runout in order to verify that the amount of runout has been reduced and brought to within tolerances. Mark the location of the high spot on the tire and wheel asse ...

Engine Oil Cooler Assemble
Caution: Refer to Fastener Caution. Install the engine oil filter cap (1) along with a NEW seal ring (2) and a NEW oil filter element (3) and tighten to  25 Y (18 lb ft). Install the engine oil pressure indicator switch (5) and ...

Starting System Description and Operation
The starter motors are non-repairable starter motors. They have pole pieces that are arranged around the armature. Both solenoid windings are energized. The pull-in winding circuit is completed to the ground through the starter motor. The windings work together magnetically to pull and hold in ...