Chevrolet Sonic Repair Manual: Bluetooth (Overview)
For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing:
- Placement and receipt of calls in a hands-free mode.
- Sharing of the cell phone’s address book or contact list with the vehicle.
To minimize driver distraction, before driving, and with the vehicle parked:
- Become familiar with the features of the cell phone. Organize the phone book and contact lists clearly and delete duplicate or rarely used entries. If possible, program speed dial or other shortcuts.
- Review the controls and operation of the infotainment system.
- Pair cell phone(s) to the vehicle. The system may not work with all cell phones. See “Pairing” in this section.
- If the cell phone has voice dialing capability, learn to use that feature to access the address book or contact list. See “Voice Pass-Thru” in this section.
- See “Storing and Deleting Phone Numbers” in this section.
Warning:
When using a cell phone, it can be distracting to look too long or too often at the screen of the phone or the infotainment system. Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.
Vehicles with a Bluetooth system can use a Bluetooth-capable cell phone with a Hands-Free Profile to make and receive phone calls. The infotainment system and voice recognition are used to control the system. The system can be used while in ON/RUN or ACC/ACCESSORY. The range of the Bluetooth system can be up to 9.1 m (30 ft). Not all phones support all functions and not all phones work with the Bluetooth system. See www.gm.com/bluetooth for more information about compatible phones.
- Bluetooth Controls
-
Use the buttons located on the infotainment system and the steering wheel to operate the Bluetooth system.
Steering Wheel Controls
- b / g (Push to Talk)
-
Press to answer incoming calls, confirm system information, and start voice recognition.
- $ / i (Mute/End Call)
-
Press to end a call, reject a call, or cancel an operation.
Infotainment System Controls
If equipped, the infotainment system allows certain controls to be selected on the infotainment display.
For information about how to navigate the menu system using the infotainment controls, see Operation.
- 5 / > (Phone)
-
Press to enter the Phone main menu.
- Voice Recognition
-
The voice recognition system uses commands to control the system and dial phone numbers.
- Noise
-
The system may not recognize voice commands if there is too much background noise. Do not point the center air vents directly upward.
- When to Speak
-
A tone sounds to indicate that the system is ready for a voice command. Wait for the tone and then speak.
- How to Speak
-
Speak clearly in a calm and natural voice.
- Audio System
-
When using the Bluetooth system, sound comes through the vehicle's front audio system speakers and overrides the audio system. Use the O /VOL knob during a call to change the volume level. The adjusted volume level remains in memory for later calls. The system maintains a minimum volume level.
- Other Information
-
The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners.
See Radio Frequency Statement.
Audio Disc Player and USB Receptacle Replacement
Audio Disc Player and USB Receptacle Replacement
Callout
Component Name
1
Audio Disc Player and USB Receptacle
Proced ...
Communication Interface Module Battery Replacement
Communication Interface Module Battery Replacement
Callout
Component Name
Preliminary Procedure
Remove the instrument panel low ...
Other materials:
Wheels and Trim—Aluminum or Chrome
Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing
thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied.
Caution
Chrome wheels and other chrome trim may be damaged if the vehicle is not washed
after driving on roads that have bee ...
Floor Carpet Drying
If the carpet or the pad or insulator is wet, use the following criteria for
drying or for replacing the components:
For a 1-piece carpet assembly bonded to a cotton or a fiber padding, replace
the entire assembly.
For a 2-piece carpet assembly with a cotton or a fiber padding, replace ...
Tire and Wheel Balancing (Balancing/Wheel Weights)
Use 3M wheel weights, refer to Adhesives, Fluids, Lubricants, and Sealers
for application.
Surface of the wheel must be clean and dry.
All tire and wheel assemblies are to be checked for static tolerance of
2 grams and not more than 20 grams per plane, using cut-to-length weight produc ...
0.0148