|
Callout |
Component Name |
|---|---|
|
1 |
Valve Body Ball Check Valve (Qty: 6) |
|
2 |
Control Valve Channel Plate Spacer Plate Assembly |
|
3 |
Valve Channel Plate Note: Inspect the channel plate bolt pass through holes for damage or brinelling. Any damage could cause leaking. Replace as necessary. |
|
4 |
Control Valve Body Bolt M5 x 40.5 (Qty: 1) Caution: Refer to Fastener Caution.
7 Y (62 lb in) |
|
5 |
Control Solenoid Valve Support |
Park Brake and P (Park) Mechanism Check
Control Valve Body Assembly Assemble (Gen 2)Cruise Control
If the vehicle is equipped with cruise control, a speed of about 40 km/h (25
mph) or more can be maintained without keeping your foot on the accelerator. Cruise
control does not work at speeds below 40 km/h (25 mph).
Warning
Cruise control can be dangerous where you cannot drive safely at a st ...
Cleanliness and Care
An automobile engine is a combination of many machined, honed, polished, and
lapped surfaces with tolerances that are measured in ten thousandths of an inch.
When any internal engine parts are serviced, care and cleanliness are important.
A liberal coating of engine oil should be applied to fr ...
Turbocharger Oil Feed Pipe Replacement
Removal Procedure
Open the hood.
Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection
and Connection.
Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat
Shield Replacement.
Remove the turbocharger oil feed p ...