Chevrolet Sonic Repair Manual: Metric Wheel Nuts and Bolts Description
Metric wheel/nuts and bolts are identified in the following way:
- The wheel/nut has the word Metric stamped on the face.
- The letter M is stamped on the end of the wheel bolt.
The thread sizes of metric wheel/nuts and the bolts are indicated by the following example: M12 x 1.5.
- M = Metric
- 12 = Diameter in millimeters
- 1.5 = Millimeters gap per thread
Lead/Pull Description
At a constant highway speed on a typical straight road, lead/pull is the amount
of effort required at the steering wheel to maintain the vehicle's straight path.
Important: Vehicles will t ...
P-Metric Sized Tires Description
245/50r16953typeloadindep-passengerttemporarylt-lighttruckspeedsymbolsectionwidth(millimeters)235245275construction(sectionwidth)ddagonal(bas)40sectionwidthsectionheight
Replacement tires should be ...
Other materials:
Hood Primary and Secondary Latch Replacement
Hood Primary and Secondary Latch Replacement
Callout
Component Name
1
Hood Primary and Secondary Latch Bolt (Qty:?€‰2)
Caution: Refer to Fastener Caution.
Tighten
22?€‰Y (16?€‰lb?€‰ft) ...
Lead/Pull Description
At a constant highway speed on a typical straight road, lead/pull is the amount
of effort required at the steering wheel to maintain the vehicle's straight path.
Important: Vehicles will tend to lead/pull in the direction of the
road slope as part of normal operation.
Lead/pull is ...
Spark Plug Replacement
Spark Plug Replacement
Callout
Component Name
Preliminary Procedure
Open the hood.
Remove the engine sight shield.
Remove the ignition coil. Refer to
Ignition Coil Replacement.
1
Spark P ...
0.0049