Callout |
Component Name |
---|---|
1 |
Hose Retainer (QTY:2) Note: Squeeze the retainer on opposite sides to release. |
2 |
Secondary Air Injection Pipe. Procedure
Disconnect the pipe from the secondary air injection pump and the air cleaner. |
Plastic Identification and Refinishing Systems
Plastic Identification and Refinishing Systems
Identifying Symbol?€“ Old Symbol in ( )s
Chemical Composition or Plastic Family Name
Typical Area(s) Where Part is Used
Examples of Common / Trade Names
Type of ...
Control Solenoid Valve and Transmission Control Module Assembly Inspection
Verify the conditions listed below do not exist. Carefully
inspect the control solenoid valve assembly connectors and pins (1, 2, 4, 6)
for the condition. Repair or replace as necessary.
Damage
Bent pins
Debris
Broken retaining tab
Contamination
Verify there is ...
Torque Converter Housing Cleaning and Inspection
Torque Converter Housing Cleaning and Inspection
Callout
Component Name
Caution: After cleaning the transmission components, allow
to air dry. Do not use cloth or paper towels in order to dry any transmission
compone ...