Chevrolet Sonic Repair Manual: Charging

Communication Interface Module Battery Replacement

Communication Interface Module Battery Replacement Callout Component Name Preliminary Procedure Remove the instrument panel low ...

Charging System Description and Operation

Electrical Power Management Overview The electrical power management system is designed to monitor and control the charging system and send diagnostic messages to alert the driver of possi ...

Other materials:

Rear Wiper/Washer System Description and Operation
The rear window wiper motor is located inside the hatchback door and is directly connected to the rear window wiper. Ignition voltage is supplied to the rear wiper motor through the wiper switch. The hatchback rear window washer systems equipped with a separate washer fluid pump, hose, and noz ...

Brake Pressure Modulator Valve Bracket Replacement
Removal Procedure Remove the brake pressure modulator valve (BPMV) and bracket assembly. Refer to Brake Pressure Modulator Valve Replacement. Remove the BPMV bolts (1). Remove the BPMV bracket. Installation Procedure Install the BPMV br ...

Tire and Wheel Assembly Balancing - On-Vehicle
Special Tools EL-38792-A Electronic Vibration Analyzer (EVA) 2 If after following the tire and wheel vibration diagnostic process, some amount of tire and wheel vibration is still evident, an on-vehicle high-speed spin balancer may be used to perform an on-vehicle balance in an attempt ...