Chevrolet Sonic Repair Manual: Torque Converter

Range Selector Lever Cable Replacement

Removal Procedure Set the park brake and chock the wheels. Disconnect the transmission range selector lever cable terminal (1) from the transmission manual shift leve ...

Front Wheel Drive Shaft Seal Replacement - Torque Converter Housing Side

Front Wheel Drive Shaft Seal Replacement - Torque Converter Housing Side Callout Component Name 1 Front Wheel Drive S ...

Other materials:

Remote Control Door Lock Receiver Replacement
Remote Control Door Lock Receiver Replacement Callout Component Name Preliminary Procedure Remove the windshield outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Cover Replacement. ...

Front Bumper Impact Bar Replacement
Removal Procedure Warning: Refer to Approved Equipment for Collision Repair Warning. Disable the SIR system. Refer to SIR Disabling and Enabling. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove all ...

Neutral - Engine Running (Gen 2)
When the gear selector is moved to the Neutral (N) position, the hydraulic and electrical system operation is identical to Park (P) range. However, if Neutral is selected after the vehicle was operating in Reverse (R), the normally-low 35R pressure control solenoid is commanded OFF and the fol ...