|
Callout |
Component Name |
|---|---|
|
1 |
Torque Converter and Differential Housing Bolts M8 x 30 (Qty: 15) |
|
2 |
Torque Converter with Fluid Pump Housing Assembly |
|
3 |
Torque Converter Housing Gasket Note: Discard the seal. It is not reusable. |
|
4 |
Fluid Pump Seal Assembly Note: Discard the seal. It is not reusable. |
Torque Converter Housing with Fluid Pump Assembly Installation (6T40/45/50 Non
Hybrid)
Torque Converter InstallationRear Window Wiper Motor Grommet Replacement
Rear Window Wiper Motor Grommet Replacement
Callout
Component Name
Preliminary Procedure
Remove the rear window wiper motor. Refer to Rear Window Wiper Motor
Replacement.
1
Rear Window Wiper Mot ...
Front Disc Brake Pads Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning.
Note: Always replace disc brake pads in axle sets.
Inspect the fluid level in the brake master cylinder reservoir.
If the brake fluid level is midway between the maximum-full point and
the minimum allowab ...
Camshaft Position Actuator Adjuster Removal
Special Tools
EN-6340 Camshaft Adjuster Locking Tool
EN-6628-A Camshaft Locking Tool
For equivalent regional tools, refer to Special Tools.
Note: The right half of the EN-6340 locking tool can be
recognized by the lettering "right", arrow, on the tool.
Pre ...