Chevrolet Sonic Repair Manual: Oil Level Indicator Tube

Engine Oil and Oil Filter Replacement

Removal Procedure Open hood. Place a drain pan below the vehicle. Caution: To prevent damage to oil filter cap ensure proper tool is used. Do not use an open end wrench wh ...

Oil Level Indicator Tube Replacement

Removal Procedure Note: If the engine oil level is at maximum, some oil may emerge when drawing out the oil dipstick guide tube. Place collecting basin underneath. ...

Other materials:

General Description
The factory installed tires are designed to operate satisfactorily with loads up to and including the full rated load capacity when these tires are inflated to the recommended pressures. The following factors have an important influence on tire life: Correct tire pressures Correct wheel ...

Intake Manifold Installation (1.8L LUW and LWE)
Clean the sealing surfaces. Install 4 NEW gaskets. Caution: Refer to Fastener Caution. Install the intake manifold (2) and the 7 intake manifold bolts (1) and tighten to  20 Y (15 lb ft). Install the intake m ...

Engine Coolant Temperature Sensor Replacement - Radiator
Engine Coolant Temperature Sensor Replacement - Radiator Callout Component Name Preliminary Procedure Drain the cooling system. Refer to Cooling System Draining and Filling. Remove the right front wheelhouse liner. Ref ...