Chevrolet Sonic Repair Manual: Oil Pump

Oil Flow Check Valve Replacement

Oil Flow Check Valve Replacement Callout Component Name Preliminary Procedure Remove the generator. Refer to Generator Replacem ...

Engine Front Cover and Oil Pump Assemble

Oil Pump Installation Note: The oil pump slide spring and pin, as well as the slide seal and slide seal spring can be ordered as single parts. All other oil pump co ...

Other materials:

Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
Pipe Joint Compound Note: Three types of sealer are commonly used in engines. These are RTV sealer, anaerobic gasket eliminator sealer, and pipe joint compound. The correct sealer and amount must be used in the proper location to prevent oil leaks. DO NOT interchange the 3&# ...

Bushing and Mating Shaft Inspection
Note: Proper bushing and corresponding mating shaft inspection should be performed before replacing the bushing, shaft, and in some cases, the component which houses the bushing. Thoroughly clean and dry the bushing and shaft surfaces before inspecting for damage. Any of the followin ...

Low and Reverse and 1-2-3-4 Clutch Housing, Low and Reverse Clutch Assembly, Output Sun Gear, and 2-6 Clutch Plate Disassemble (Gen 1)
Low and Reverse and 1-2-3-4 Clutch Housing, Low and Reverse Clutch Assembly, Output Sun Gear, and 2-6 Clutch Plate Disassemble Callout Component Name 1 1??? Clutch Backing Plate 2 1??? Clu ...