Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
Exterior Lighting Systems Description and OperationKey with Integrated Transmitter Programming
Keys can be programming in various ways using the procedures outlined below.
Using the Replacing Keys procedures will first erase all the known keys from the
vehicle. Any existing keys and any new keys will then be programmed. This procedure
should be used any time a key is required to be unle ...
Intake Manifold Assemble (1.8L LUW and LWE)
Install the 4 NEW multiport fuel injector seals (4).
Install the multiport fuel injection fuel rail (2) and the fuel injectors (3)
to the intake manifold (5).
Caution: Refer to Fastener Caution.
Install the 2 multiport fuel in ...
Manual Transmission Shift Lever and Selector Lever Cable Adjustment
Remove the floor console. Refer to
Front Floor Console Replacement.
Lift upward and disengage (do not remove) both cable lock
adjusters (1) to release the internal cable assembly, one for each side.
Block the shift control housing, push the selector lever ( ...