Chevrolet Sonic Repair Manual: Ignition System

Fuel Tank Replacement

Removal Procedure Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Relieve the fuel pressure. Refer to Fuel Pressure Relief. ...

Electronic Ignition System Description

Electronic Ignition System Operation The electronic ignition system produces and controls the high energy secondary spark. This spark ignites the compressed air/fuel mixture at precisely t ...

Other materials:

Hood Ajar Indicator Description and Operation
Hood Ajar Switch The body control module (BCM) applies B+ to the hood ajar signal circuit and monitors the voltage to determine the position of the hood. When the hood is closed, the switch is open and voltage remains high. When the hood is open, the switch is closed and the voltag ...

Oil Pan Installation
Special Tools EN-49980 Guidance Pins For equivalent regional tools, refer to Special Tools. Clean the sealing surfaces from old sealing material, dirt, oil and grease. Note: The sealing bead should be applied close to the inner edge of the oil pan. Take care that the oil suctio ...

Transmission Indicators and Messages
The following transmission-related indicators and messages may be displayed on the Instrument Panel Cluster (IPC). For a complete listing and description of all vehicle indicators and messages, refer to Indicator/Warning Message Description and Operation. "TRANSMISSION HOT IDLE ...