Chevrolet Sonic Repair Manual: Camshaft

Valve Guide Reaming, and Valve and Seat Grinding

Valve Cleaning Procedure Use soft bristle wire brush to clean any carbon build-up from the valve head. DO NOT use a wire brush on any part of the valve stem. The valve stem is chr ...

Camshaft Actuator System Description

Camshaft Actuator System Overview (1) Camshaft Actuator Vane (2) Timing Chain Sprocket (3) Engine Oil Pressure-For retarding ...

Other materials:

Rear Brake Hose Replacement (Body to Axle - Drum Brake)
Removal Procedure Warning: Refer to Brake Dust Warning. Warning: Refer to Brake Fluid Irritant Warning. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Install ...

Multi-Axis Acceleration Sensor Module Programming and Setup
Note: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the Multi-axis Acceleration Sensor or Inertia Sensor Module (IMU) is not properly configured with the correct calibration software, the Electronic Brake Control Module will ...

Brake Rotor Assembled Lateral Runout Correction - On Vehicle Lathe
Special Tools CH-45101-100 Conical Brake Rotor Washers For equivalent regional tools, refer to Special Tools. Warning: Refer to Brake Dust Warning. Note: Brake rotor thickness variation MUST be checked before checking for assembled lateral runout (LRO). Thickness ...