Vehicle Speed Sensor Replacement
Air Conditioning Clutch Assembly Replacement (LDE/LUW/LWE)Ignition Positions
The ignition switch has four different positions.
To shift out of P (Park), the ignition must be in ON/RUN and the regular brake
pedal applied.
1 (STOPPING THE ENGINE/LOCK/ OFF): When the vehicle is stopped, turn the ignition
switch to LOCK/ OFF to turn the engine off.
This position locks t ...
Body Panel Paint Protector Replacement (VGC)
The paint protective film and vehicle surface temperature should be 13?€“32?°C
(55?€“90?°F) for best results.
Automatic car washes should be avoided for at least 24?€‰hours after the
paint protective film application.
Wipe the vehicle surface with isopropyl alcohol or fl ...
Brake Rotor Thickness Variation Measurement
Warning: Refer to Brake Dust Warning.
Note: Any disc brake rotor that exhibits thickness variation exceeding
the maximum acceptable level must be refinished or replaced. Thickness variation
exceeding the maximum acceptable level can cause brake pulsation.
If the inboard fricti ...